Yachtcare FEW VT – Styrene-Free 2K Polyester Fine & Filling Putty

FEW VT by Yachtcare / Vosschemie is a two-component, styrene-free polyester pulling and fine filler that meets the highest professional requirements. Thanks to a perfectly balanced combination of high-quality resins and special fillers, the filler has a particularly smooth working consistency and a closed-pore, smooth surface after curing.

The shape-retaining, thixotropic mass allows both the fine leveling of small scratches and the filling of medium irregularities – even on vertical surfaces. FEW VT is extremely easy to sand, shows very low shrinkage and adheres reliably to many substrates such as steel, wood, GRP and filled surfaces.

Due to its white color, the filler is ideal for repairs on color-matched gelcoat surfaces in the topside area of boats.

Areas of application

• Leveling small and larger irregularities on steel, GRP and wood
• Repairing small scratches and paint damage in the bodywork area
• Fine and pore filling after filler or fiber filler work
• Quick repair of color-matched gelcoat surfaces in the topside area
• Refurbishing weathered or corroded components
• Repairs, contouring and model making
• Filling work on wooden components such as doors, window frames and furniture

Advantages

• Styrene-free – lower odor and user-friendly
• Smooth, thixotropic consistency
• Very easy to sand
• Low shrinkage during curing
• Closed-pore, fine surface
• Suitable for horizontal and vertical surfaces
• Adheres to many substrates (wood, metal, GRP)
• Ideal for professional painters, boat builders and workshops
• Quality product from Yachtcare / Vosschemie

Technical data

• Contents: 250 g, 500 g, 1.0 kg (incl. hardener)
• Color shade: White
• Spec. weight: 1.87 g/cm³ (hardener: 1.10 g/cm³)
• Hardener addition: 2–3 % BPO hardener paste
• Consistency: thixotropic / pasty
• Base: Vinyl toluene
• Pot life: 4–6 minutes at 18–20 °C
• Sandable after: 15–20 minutes
• Recommended working temperature: 15–20 °C
• Bakeable up to: 80 °C

Application

1. Clean, degrease and coarsely sand the substrate (not on thermoplastic acrylic).
2. Completely remove sanding dust.
3. Mix the filler mass thoroughly with 2–3 % BPO hardener (do not exceed the mixing ratio).
4. Apply the mass thinly or pasty, depending on the desired result.
5. Working time: 4–6 minutes at 18–20 °C.
6. Sandable after 15–20 minutes.
7. At low temperatures: Warm the substrates with a heat lamp.
8. Before topcoating: isolate with 2K acrylic high-build filler or EP filler.